What is the seaplane terminal

Editor: Guangzhou Hengqiao Offshore Engineering Co., Ltd.

Edit date: 2019.2.27

Company main: seaplane Wharf, Yacht Club, Aquatic Swimming Pool, Aquatic fishing platform, Aquatic Aquaculture crate, Aquatic House, Aqua float platform, Aquatic floating Bridge, Water Recreation facilities complete set equipment production supplier. Service hotline: 136 6010 8188

Have you ever seen a plane sailing on the water? The seaplane is on the water side of the runway without a common plane. Therefore, the airport of the seaplane has the same facilities as the hangar, tarmac, repair shop, command tower and other airports, which can be no runway. It uses the wheel on the shore and slides into the water along a specially constructed slope at the time of take-off, and then the wheel is retracted, so that it can slide on the water at high speed after the main channel, and when the speed reaches the water-leaving requirement, the plane leaves the water. The process is reversed at the time of return. The slope of the water and shore, as described here, is the so-called water The plane docks.

The waterplane wharf is made of high molecular weight high density polyethylene (HDPE),) for anti-corrosion, anti-freezing, anti-oxidation, UV-resistant materials, not to be eroded by seawater, chemicals, oil stains and aquatic organisms; No pollution, do not break the environment, is the best all-round environmental protection products.

The upper surface of the buoy is designed with anti-skid pattern, which is safe and stable to avoid the common danger of cement and wood facilities, such as sliding to, broken sawdust, rusty nail, etc.

Buoy size: 50x50x40cm (length x width x height)

Weight: 7kg (2%)

Carrying capacity: 340kg per square meter

Material: polymer polyethylene (HDPE)

Color: blue, black, gray, yellow

Structural fittings: long connection bolt, short connection bolt, side strengthening bolt, side fastening bolt, gasket, rotary wrench

Characteristics of the buoy: The floating body is used as a diagonal tensile test at a test speed of 500 mm/ min, and can reach the tensile strength of more than 1600 kg.